INFUSIONSREGLER Dosi-Flow 30, 1 pc

Instructions for use of the article Infusion controller D-Flow 30

Product characteristics:

The infusion controller D-Flow 30 enables precise infusion dosing. The system consists of an infusion device with a 15µ filter, a drip chamber, a connecting tube and a Luer-Lock injection cap. The infusion controller is intended for use with adults. It allows a drop count of 20 drops per millilitre and a flow rate of 5 to 250 millilitres per hour. The tube has a diameter of 2.8 x 4.1 millimetres and a total length of 240 centimetres. In addition, there is an air inlet filter with a pore size of 1 µ and a particle filter with a pore size of 15 µ. The injection point is a Y-part.

Material composition:

For the drip chamber, the materials are PVC, ABS, PP, PE and LDPE. The regulator is made of ABS, the tubing is made of PVC (DOP-free), the clamp is made of HDPE and PP, the Y injection site is made of latex-free ABS and the lower connector is made of ABS and PE.

Packaging:

The individual packaging comprises paper, PP, PA and LDPE. The carton is made of cardboard and the outer carton of corrugated cardboard.

Notes:

Manufacturer: P.J.Dahlhausen & Co.GmbH, Emil-Hoffmann-Strasse 53, 50996 Cologne, Germany

Source: Manufacturer's information, as of 10/2021