MIKROZID sensitive wipes premium Desinf.MP+surfaces, 100 pcs

Instructions for use for MIKROZID sensitive wipes premium Desinf.MP+surfaces, 100 pcs

Instructions for use of the article Mikrozid sensitive wipes premium surface disinfection Product properties: - Mikrozid sensitive wipes premium is an alcohol-free rapid disinfection for non-invasive medical devices. - Suitable for alcohol-sensitive and sensitive medical devices. - Ready to use. Fields of application: - The product is suitable for disinfecting medical devices, including sensitive surfaces such as ultrasound heads. - It convinces through outstanding material compatibility. Instructions for use: - Wipe the surface thoroughly with the cloth and allow the active substance solution to take effect. - Remove soiling before disinfection. - Treat only small surfaces. - Wiping range depends on room temperature and surface structure. - Observe hygienic aspects when opening and threading the first cloth. - Close the lid after use. - For professional use only. - Report serious incidents to the manufacturer and the competent authority. - Not suitable for final disinfection of semi-critical and critical medical devices. Refilling the can: - Disinfect hands and wear protective gloves and gown before refilling. - Avoid contamination of gloves. - Transfer expiry date to dispenser can. - Place the refill bag completely in the dispenser box and cut off the edge of the bag. - Pull the cloth out of the centre of the roll and thread it into the guide slot in the lid. - Disinfect the lid and screw it on. - For high-risk areas, the manufacturer recommends not using refill bags. Chemical-physical data: - Density: approx. 1.00 g/cm3 / 20 °C / active substance solution. - Colour: colourless - Flash point: Not applicable - Form: Aqueous solution on non-woven fabric - pH: 6 - 8 / 100 % / 20 °C / active substance solution - Viscosity, dynamic: No data available Special advice: - Read label and product information before use. - The suitability of the product with regard to its spectrum of activity must be tested separately. - When selecting a suitable surface disinfectant, consider the spectrum of activity on microorganisms. - There are strains of bacteria that may show reduced sensitivity or tolerance to disinfectants. - For high-risk areas, the manufacturer recommends mikrozid PAA wipes or mikrozid AF wipes with a broad spectrum of activity. - Wearing of protective gloves is recommended. Composition: - 100 g solution contains: 0.25 g alkyl(C12-16)dimethylbenzylammonium chloride (ADBAC/BKC (C12-16)), 0.25 g didecyldimethylammonium chloride (DDAC), 0.25 g alkyl(C12-14)ethylbenzylammonium chloride (ADEBAC (C12-C14)). Registration number: - N-30345, N-30346 Source: www.schuelke.com As of 06/2022