Lenscare Combi Multiaction, 380 ml

Product features

Lenscare Kombi-MultiAction is a multifunctional all-in-one solution that was specially developed for the care of soft contact lenses.This solution provides comprehensive cleaning, disinfection, storage and wetting of the lenses.It is ideal for all soft contact lenses and includes all necessary cleaning steps.An antibacterial storage container is also included.

The combination MultiAction All-In-One solution contains an integrated protein remover and a wetting agent.This wetting agent is deposited on and in the contact lens to ensure spontaneous tolerability and a comfortable fit.For optimal hygienic storage, you should use the container provided.

Area of application

The Lenscare Combi MultiAction solution is suitable for cleaning, rinsing, disinfecting, storing and putting on contact lenses.For effective cleaning, place the contact lens in the palm of your hand and rub both sides with a few drops of the solution in a “star shape” from the center to the edge and rinse thoroughly.

Manual cleaning breaks down the layer of contaminants on the contact lens so that the solution can remove the contaminants when rinsed thoroughly.It is important to wipe both sides of the lens and make sure the contact lens is not inverted.

Disinfection takes place during storage.This requires storage for at least 4 hours in a sufficient amount of fresh solution in the storage container.The preservatives contained in the Lenscare Kombi-MultiAction allow the contact lenses to be stored for several days.

Active ingredients / ingredients / ingredients

Lenscare Kombi-MultiAction contains the following active ingredients: 10 mg polypropylene glycol, poly(hexamethylene biguanide), 0.79 mg edetic acid, 1 mg disodium edetat-2 water, 0.6 mg polyquaternium-2.The composition includes EDTA 0.1%, poloxamer 0.25%, PVP90 0.05%, polyhexanides 0.0002% in isotonic buffered solution, sterile by filtration.

In addition, the solution contains poloxamer, polyhexanides 0.0001% w/v, HPMC, disodium edetate, phosphate salts, sodium chloride and water.

Application recommendation

Before storing the contact lenses in the lens case, manual pre-cleaning is required.Place the contact lens in your washed palm, drip a few drops of the All-In-One solution onto it and gently rub it on each side in a star shape from the center to the edge with your fingertip for 15 to 20 seconds.Finally, place your cleaned contact lenses in a contact lens case filled with the all-in-one solution for disinfection and storage.

You can store the contact lenses in the combination MultiAction solution for up to 7 days without having to disinfect them again.The individual care steps must then be repeated.After inserting the lenses, the solution in the lens case must be disposed of.Do not rinse the container with water, let it air dry.

Once a week, in the morning after removing the lenses, fill fresh all-in-one solution into the lens container, screw it on and leave it upside down for the day so that the lid is also disinfected.This solution is also disposed of and replaced in the evening before the worn lenses can be inserted.For complete usage instructions, please refer to the instructions on the product.

Contraindications

If you are known to be hypersensitive to any of the above ingredients, this product should not be used.

No prescription is required for this product.