Aerochamber with mask for infants, 1 pc

Intended use

The AeroChamber Plus Flow-Vu is an antistatic inhalation aid that enables easy and safe inhalation with a metered dose aerosol prescribed by your doctor.The aerosol is delivered into the chamber of the AeroChamber Plus Flow-Vu, where it can be easily inhaled without the need to coordinate breathing and the release of the MDI.This inhaler aid is equipped with a mask for children and infants.

Before each use

This inhaler aid can be used straight out of the packaging.Make sure you read these instructions and the instructions for use provided with the metered dose inhaler.Before each use, carefully inspect the chamber and remove any foreign objects that may be present.Replace damaged or missing parts immediately.

Using your inhaler device

To use the AeroChamber Plus Flow-Vu, first remove the cap from the metered dose inhaler and shake it immediately before use according to its accompanying instructions for use.Insert the metered dose inhaler into the back of the inhaler and place the mask on the child's face so that it is effectively sealed.Release a spray at the beginning of a slow breath as the Flow-Vu indicator moves toward your child.Maintain seal for 5-6 breaths after triggering the spray.

Tips

Give praise and rewards to motivate the child.Use teddy bears or dolls to demonstrate the use of the chamber in a playful way.If possible, carry out the treatment when the child is happy and not crying.

Notes

Use the Flow-Vu Breathing Indicator to ensure a good seal, coordinate inhaler pushing with inhalation, and count the number of breaths taken.The Flow-Vu indicator moves towards the child when they breathe in and only moves when it is well sealed.Only give 1 spray into the inhaler aid per use.Read the instructions for use included with the metered dose inhaler carefully and follow them.

Cleaning instructions

The AeroChamber Plus Flow-Vu can be used immediately and should then be cleaned weekly.Remove the back and twist the inhaler to remove the front.Place the parts in a solution of a little dishwashing detergent and lukewarm clean water for 15 minutes and gently move them back and forth.Rinse the parts with clean water.You can also place the items in the top rack of the dishwasher, making sure the product is placed securely facing upwards.Run the dishwasher on a normal or light cycle and avoid heated drying.Shake off excess water and allow the pieces to air dry in a vertical position.Make sure the parts are dry before reassembling.To assemble, attach the front section to the end of the inhaler aid and twist firmly until it is locked in position.Align the alignment mark on the back with the Flow-Vu breathing indicator and press firmly to ensure a snug fit of the back.

Notes

No prescription is required for this product.If you have any questions about how the AeroChamber Plus Flow-Vu inhaler works or can be used, please contact your doctor or pharmacist.Do not boil or sterilize the product.The product should be replaced with a new one after 12 months of use.Does not contain latex, bisphenol A (BPA), phthalate, lead or PVC.Do not share this medical device with another person.Remove medication residues in the inhaler aid with a soft cloth.Washing with heavily soiled dishes is not recommended.Use a rinse aid when cleaning in a dishwasher.

Precautions

Caution: Do not leave children unattended with the AeroChamber Plus Flow-Vu inhaler aid.Do not sterilize or boil.The inhaler aid can be permanently damaged if it is boiled, sterilized or cleaned in the dishwasher at temperatures above 70°C.

Product features

AeroChamber Plus Flow-Vu - Antistatic inhalation aid with mask for children and infants.

Address of the provider/manufacturer

Chiesi GmbH
Ludwig-Erhard-Strasse 34
20459 Hamburg