Aerochamber with mask for adults, 1 piece

Intended use

The AeroChamber Plus Flow-Vu is an antistatic inhalation aid that enables easy and safe inhalation with a metered dose aerosol prescribed by your doctor.The aerosol is released into the chamber of the AeroChamber Plus Flow-Vu and can be easily inhaled there without having to coordinate breathing and the release of the metered dose aerosol.It is equipped with a mask for adults and children aged 5 and over.

Before each use

This inhaler aid can be used straight out of the packaging.Make sure you read these instructions and the instructions for use provided with the metered dose inhaler.Before each use, carefully inspect the chamber and remove any foreign objects that may be present.Replace damaged or missing parts immediately.

Using your inhaler device

Remove the metered dose aerosol cap from the inhaler.Shake the metered dose aerosol immediately before use in accordance with the enclosed instructions for use.Insert the metered dose aerosol into the back of the inhaler aid.Place the mask on the face and ensure it has an effective seal.Exhale and then release a spray at the beginning of a slow breath.Hold the mask in place and breathe in and out through the inhaler for 5-6 breaths.

Notes

Slow down when you hear the whistle (this means you are breathing in too quickly).The Flow-Vu Breathing Indicator can help coordinate MDI release with breathing, count the number of breaths inhaled, and ensure a good seal with Flow-Vu.The indicator moves toward the patient when inhaling, but only if the Flow-Vu respiratory indicator is well sealed.Only give 1 spray into the inhaler aid per use.Read the instructions for use included with the metered dose inhaler carefully and follow them.

Cleaning instructions

The AeroChamber Plus Flow-Vu can be used immediately and should then be cleaned weekly.Remove the back piece.To remove the front part, turn the inhaler aid.Soak the parts in a solution of a little dishwashing detergent and lukewarm clean water for 15 minutes.Move gently back and forth.Rinse the parts with clean water.You can also place the parts in the top rack of the dishwasher.Make sure the product is placed securely facing upwards.Run the dishwasher on a normal or light cycle and avoid heated drying.Shake off excess water and allow parts to air dry in a vertical position.Make sure the parts are dry before reassembling.To assemble, attach the front section to the end of the inhaler aid and twist firmly until it is locked in position.Align the alignment mark on the back with the Flow-Vu breathing indicator.Press firmly to ensure a good fit of the back.

Notes

If you have any questions about how the AeroChamber Plus Flow-Vu inhaler works or can be used, please contact your doctor or pharmacist.Do not boil or sterilize the product.The product should be replaced with a new one after 12 months of use.Does not contain latex, bisphenol A (BPA), phthalate, lead or PVC.Do not share this medical device with another person.Remove medication residues in the inhaler aid with a soft cloth.Washing with heavily soiled dishes is not recommended.Use a rinse aid when cleaning in a dishwasher.

Precautions

Caution: Do not leave children unattended with the AeroChamber Plus Flow-Vu inhaler aid.Do not sterilize or boil.The inhaler aid can be permanently damaged if it is boiled, sterilized or cleaned in the dishwasher at temperatures above 70°C.

No prescription is required for this product.

Address of the provider/manufacturer

Chiesi GmbH
Ludwig-Erhard-Strasse 34
20459 Hamburg